Planet SGS-6341 Series Command Manual page 307

Chapter 17 Commands for Egress QoS
17.1 mls qos egress green remark
Command:
[no] mls qos egress green remark
Function:
Set Egress QoS remarking to take effect for green packets, no command does not take effect to
green packets.
Default:
Do not modify green packets.
Command Mode:
Global Mode
Usage Guide:
QoS attribute of green packets will be modified by remark table after enable the global configuration.
Example:
Egress remarking takes effect for green packets.
Switch(config)#mls qos egress green remark
17.2 mls qos map
Command:
mls qos map cos-cos <color> <cos1...cos8>
mls qos map cos-dscp <color> <dscp1...dscp8>
mls qos map dscp-cos <color> <dscp list> to <cos>
mls qos map dscp-dscp <color> <dscp list> to <dscp>
no mls qos map (cos-cos | cos-dscp | dscp-cos | dscp-dscp) <color>
Function:
Set mapping between Egress QoS remark tables, no command restores the default configuration.
Parameters:
cos-cos：Set mapping from cos to cos for Egress remark cos table
cos-dscp：Set mapping from cos to dscp for Egress remark cos table
dscp-cos：Set mapping from dscp to cos for Egress remark dscp table
dscp-dscp：Set mapping from dscp to dscp for Egress remark dscp table
<color>：Packet's colors, including green、yellow、red
<cos>：cos value, its range from 0 to 7
17-153