Planet SGS-6341 Series Command Manual page 891

45.3.36 show ipv6 pim neighbor
Command:
show ipv6 pim neighbor [detail|]
Function:
Display router neighbors.
Command Mode:
Any Mode
Usage Guide:
Display multicast router neighbors maintained by the PIM.
Example:
Switch(config)#show ipv6 pim neighbor
Neighbor
Address
Fe80::203:fff:fee3:1244
fe80::20e:cff:fe01:facc
Displayed Information
Neighbor Address
Interface
Uptime/Expires
Ver
DR Priority/Mode
45.3.37 show ipv6 pim nexthop
Command:
show ipv6 pim nexthop
Function:
Display the PIM buffered nexthop router in the unicast route table.
Command Mode:
Any Mode
Usage Guide:
Display the PIM buffered nexthop router information.
Example:
Switch#show ipv6 pim nexthop
Interface Uptime/Expires
Vlan1 00:00:10/00:01:35 v2
Vlan1 00:00:13/00:01:32 v2
Explanations
Neighbor address
Neighbor interface
Running time /overtime
Pim version ,v2 usually
DR priority in the hello messages from the
neighbor and if the neighbor is the interface's DP
45-37
Ver DR
Priority/Mode
1 /DR
1 /