Default:
leavetimer is disabled.
Usage Guide:
Show running state and expiration time of each leave timer.
Example:
Show running state and expiration time of each leave timer on current port.
Switch#show gvrp leavetimer running information interface ethernet 1/0/1
VLANID
running state
------------
----------
100
300
DOWN
12.1.19 show gvrp port-member
Command:
show gvrp (active|) port-member
Function:
Shows all ports with GVRP enabled. "active" means the port is in active state with GVRP enabled.
Parameter:
active means the port is in active state
Command mode:
Admin Mode.
Default:
GVRP is disabled on port.
Usage Guide:
Show all ports (enable GVRP) saved in GVRP.
Example:
Show all ports with GVRP enabled.
Switch#show gvrp port member
Ports which were enabled gvrp included:
Ethernet1/0/3(T)
Ethernet1/0/5(T)
Ethernet1/0/7(T)
Ethernet1/0/9(T)
expired time
---------
UP
0.2 s
non
Ethernet1/0/4(T)
Ethernet1/0/6(T)
Ethernet1/0/8(T)
Ethernet1/0/10(T)
12-58