Related Manuals for Planet SGS-5220-24T2X
Summary of Contents for Planet SGS-5220-24T2X
- Page 1 L2+ 24-Port Gigabit + 2-Port 10G SFP+ Stackable Managed Switch SGS-5220-24T2X / SGS-5220-24P2X / SGS-5220-24S2X Quick Installation Guide...
- Page 2 Table of Contents 1. Package Contents ..................3 2. Requirements ..................... 4 3. Terminal Setup ................... 5 4. Logon to Console ..................6 5. Configuring IP Address ................7 6. Starting Web Management ................9 7. Saving Configuration ..................12 8. Recovering Back to Default Configuration .............13 9. Customer Support ..................14...
-
Page 3: Package Contents
1. Package Contents Thank you for purchasing PLANET L2+ 24-Port Gigabit + 2-Port 10G SFP+ Stackable Managed Switch. The description of this model is shown below: L2+ 24-Port 10/100/1000T + 4-Port Shared SFP + 2-Port SGS-5220-24T2X 10G SFP+ Stackable Managed Switch L2+ 24-Port 10/100/1000T 802.3at PoE + 2-Port 10G SFP+ SGS-5220-24P2X Stackable Managed Switch / 440W L2+ 24-Port 100/1000X SFP + 8-Port Shared TP + 2-Port SGS-5220-24S2X 10G SFP+ Stackable Managed Switch “Stackable Managed Switch” is used as an alternative name in this Quick Installation Guide. Open the box of the Managed Switch and carefully unpack it. The box should... -
Page 4: Requirements
2. Requirements z Workstations running Windows XP/2003/Vista/7/8/2008, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols. z Workstations are installed with Ethernet NIC (Network Interface Card) z Serial Port Connection (Terminal) The above Workstations come with COM Port (DB9) or USB-to-RS232 converter. The above Workstations have been installed with terminal emulator, such as Hyper Terminal included in Windows XP/2003. -
Page 5: Terminal Setup
3. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to RJ45 type of serial port of the Stackable Managed Switch. PC / Workstation with Terminal Emulation Software Managed Switch RS232 to RJ45 Cable Serial Port Serial Port 115200,8,n,1 Figure 3-1 Stackable Managed Switch Console Connectivity A terminal program is required to make the software connection to the Managed Switch. -
Page 6: Logon To Console
4. Logon to Console Once the terminal is connected to the device, power on the Stackable Managed Switch, and the terminal will display “running testing procedures”. Then, the following message asks to log-in user name and password. The factory default user name and password are shown as follows and the login screen in Figure 4-1 appears. (example on Model:24T) Username: admin... -
Page 7: Configuring Ip Address
1. At the “#” prompt, enter “show ip interface brief”. 2. The screen displays the current IP address as shown in Figure 5-1. Figure 5-1: IP Information Screen Configuring IP Address 3. At the “#” prompt, enter the following command and press <Enter> as shown in Figure 5-2. SGS-5220-24T2X# configure terminal SGS-5220-24T2X(config)# interface vlan 1 SGS-5220-24T2X(config-if-vlan)# ip address 192.168.1.100 255.255.255.0... - Page 8 The previous command would apply the following settings for the Stackable Managed Switch. IP Address: 192.168.1.100 Subnet Mask: 255.255.255.0 Figure 5-2: Configuring IP Address Screen 4. Repeat step 1 to check if the IP address is changed. Store current switch configuration 5. At the “#” prompt, enter the following command and press <Enter>. # copy running-config startup-config Figure 5-3: Saving Current Configuration Command Screen If the IP is successfully configured, the Stackable Managed Switch will apply the new IP address setting immediately. You can access the Web interface of the Managed Switch through the new IP address.
-
Page 9: Starting Web Management
6. Starting Web Management The following shows how to start up the Web Management of the Managed Switch. Note the Managed Switch is configured through an Ethernet connection. Please make sure the manager PC must be set on the same IP subnet address. For example, the default IP address of the Managed Switch is 192.168.0.100, then the manager PC should be set at 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0. - Page 10 2. When the following dialog box appears, please enter the default user name and password “admin” (or the password you have changed via console). The login screen in Figure 6-2 appears. Default Username: admin Default Password: admin Figure 6-2: Login Screen 3. After entering the password, the main screen appears as Figure 6-3 shows. Figure 6-3: Web Main Screen of Managed Switch...
- Page 11 The Switch Menu on the left of the Web page let you access all the commands and statistics the Managed Switch provides. Figure 6-4: Switch Menu If you are not familiar with Switch functions or the related param- eter, press “Help icon” anytime on the Web page to get the help description. Note Now, you can use the Web management interface to continue the Switch management or manage the Switch by console interface.
-
Page 12: Saving Configuration
7. Saving Configuration In the Stackable Managed Switch, the running configuration file stores in the RAM. In the current version, the running configuration sequence of running-config can be saved from the RAM to FLASH by executing save startup config command, so that the running configuration sequence becomes the startup configuration file, which is called configuration save. -
Page 13: Recovering Back To Default Configuration
To reset the IP address to the default IP Address “192.168.0.100” or reset the login password to default value, press the hardware reset button on the front panel for about 10 seconds. After the device is rebooted, you can login the management Web interface within the same subnet of 192.168.0.xx. SGS-5220-24T2X Stack ID Alert FAN2... -
Page 14: Customer Support
PLANET online FAQ: http://www.planet.com.tw/en/support/faq.php?type=1 Switch support team mail address: support_switch@planet.com.tw SGS-5220-24T2X/24P2X User’s Manual: http://www.planet.com.tw/en/support/download.php?type1=1&model=48555&type=3#list Copyright © PLANET Technology Corp. 2015. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.