Planet SGS-6341 Series Command Manual page 982

Chapter 49 Commands for the Number
Limitation Function of MAC and IP in
49.1 debug ip arp count
Command:
debug ip arp count
no debug ip arp count
Function:
When the number limitation function debug of ARP in the VLAN, if the number of dynamic ARP and
the number of ARP in the VLAN is larger than the max number allowed, users will see debug
information. "no debug ip arp count" command is used to disable the number limitation function
debug of ARP in the VLAN.
Command Mode:
Admin Mode.
Usage Guide:
Display the debug information of the number of dynamic ARP in the VLAN.
Examples:
Switch#debug vlan mac count
%Jun 14 16:04:40 2007 Current arp count 21 is more than or equal to the maximum limit in vlan
1!!
%Jun 14 16:04:40 2007Arp learning will be stopped and some arp will be delete !!
49.2 debug ipv6 nd count
Command:
debug ipv6 nd count
no debug ipv6 nd count
Function:
When the number limitation function debug of neighbor in the VLAN, if the number of dynamic
neighbor and the number of neighbor in the VLAN is larger than the max number allowed, users will
see debug information. "no debug ip neighbor count" command is used to disable the number
limitation function debug of neighbor in the VLAN.
Port, VLAN
49-1