Planet SGS-6341 Series Command Manual page 764

Usage Guide:
Display PIM interface information
Example:
testS2(config)#show ip pim interface
Address
10.1.4.3
10.1.7.1
Displayed Information
Address
Interface
VIF index
Ver/Mode
Nbr Count
DR Prior
DR
44.3.35 show ip pim mroute sparse-mode
Command:
show ip pim mroute sparse-mode [group <A.B.C.D>] [source <A.B.C.D>]
Function:
Display the multicast route table of PIM-SM.
Parameter:
group <A.B.C.D>: Display redistributed items that related to this multicast address
source <A.B.C.D>: Display redistributed items that related to this source
Command Mode:
Admin Mode and Global Mode
Usage Guide:
Display the BSP routers in the network maintained by PIM-SM.
Example:
Switch #show ip pim mroute sparse-mode
IP Multicast Routing Table
(*,*,RP) Entries: 0
Interface VIFindex Ver/
Mode Count Prior
Vlan1 0 v2/S
Vlan2 2 v2/S
44-40
Nbr DR DR
1 1 10.1.4.3
0 1 10.1.7.1
Explanations
Interface address
Interface name
Interface index
Pim version and mode,usually v2,sparse mode
displays S,dense mode displays D
The interface's neighbor count
Dr priority
The interface's DR address