Show Ip Rip; Show Ip Rip Database - Planet SGS-6341 Series Command Manual

Routing for Networks:
Vlan1
Vlan2
Routing Information Sources:
Gateway Distance Last Update Bad Packets Bad Routes
20.1.1.1 120 00:00:31
Distance: (default is 120)

33.37 show ip rip

Command:
show ip rip
Function:
Show the routes in the RIP route data base.
Command Mode:
Admin mode
Example:
show ip rip
Codes: R - RIP, K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS,
B – BGP
Network
R 12.1.1.0/24
R 20.1.1.0/24
Amongst R stands for RIP route, namely a RIP route with the destination network address
12.1.1.0, the network prefix length as 24, next-hop address at 20.1.1.1. It is learnt from the
Ethernet port E1/8 with a metric value of 2, and still has 2 minutes 51 seconds before time out.

33.38 show ip rip database

Command:
show ip rip database
Function:
0
Next Hop Metric From
20.1.1.1
33-163
The segment running RIP is the
Vlan 1 and Vlan 2
Routing information sources
The badpacketand bad routes from
0 the gateway 20.1.1.1 are all 0. 31
seconds have passed since the
last route update. The manage
distance is 120
Default manage distance is 120
If
2 20.1.1.1
1
Time
Vlan1 02:51
Vlan1