Configuring Ip Address - Planet WGS-5225-8P2S Quick Installation Manual

Industrial wallmount managed gigabit ethernet switch
Hide thumbs Also See for WGS-5225-8P2S:
Table of Contents

Advertisement

1. For security reason, please change and memorize the
new password after this first setup.
2. Only accept command in lowercase letter under CLI interface.
6.1 Configuring IP Address
The Wall-mount Managed Switch is shipped with default IP address shown
below:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Wall-
mount Managed Switch, please use the procedure as follows:
 Display of the Current IP Address
1. At the "#" prompt, enter "show ip interface brief".
2. The screen displays the current IP address shown in Figure 6-2.
16
Figure 6-2: IP Information Screen

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgs-5225-8p2svWgs-5225-8t2sv

Table of Contents