Planet SGS-6341 Series Command Manual page 538

34.15 redistribute
Command:
redistribute {kernel |connected| static| ospf| isis| bgp} [metric<value>] [route-map<word>]
no redistribute {kernel |connected| static| ospf| isis| bgp} [metric<value>] [route-map<word>]
Function:
Introduce the routes learnt from other routing protocols into RIPng.
Parameter:
kernel introduce from kernel routes
connected introduce from direct routes
static introduce from static routes
ospf introduce from IPv6 OSPF routes
isis introduce from IPv6 ISIS routes
bgp introduce from IPv6 BGP routes
<value> is the metric value assigned to the introduced route, ranging between 0-16
<word> is the probe poining to the route map for introducing routes
Command Mode:
Router mode
Example:
Switch#config terminal
Switch(config)#router ipv6 rip
Switch(config-router)#redistribute kernel route-map ip
34.16 redistribute ospf
Command:
redistribute ospf [<process-tag>] [metric<value>] [route-map<word>]
no redistribute ospf [<process-tag>]
Function:
To redistribute routing information from external OSPFv3 processes to RIPng process. The no form
of this command will remove the introduced OSPFv3 routing entries.
Parameters:
process-tag is the string tag for OSPFv3 process with maximum length limited within 15 characters.
If not specified, the default process will be used.
metric<value> is the metric for the introduced routing entries, limited between 0 and 16.
34-177