Planet SGS-6341 Series Command Manual page 315

standard.
Parameters:
access-group <acl-index-or-name> match the specified IP ACL or MAC ACL, the parameters are
the number or name of ACL
ip dscp <dscp-list> and ipv6 dscp <dscp-list> match the specified DSCP value, the parameter is
a list of DSCP consisting of maximum 8 DSCP values, the ranging is 0 to 63
ip precedence <ip-precedence-list> match the specified IP Precedence, the
parameter is a IP Precedence list consisting of maximum 8 IP Precedence values with a valid range
of 0 to 7
ipv6 access-group <acl-index-or-name> match the specified IPv6 ACL, the parameter
is the number or name of IPv6 ACL
ipv6 flowlabel <flowlabel-list> match the specified IPv6 flow label, the parameter is IPv6 flow label
value, the ranging is 0 to 1048575
vlan <vlan-list> match the specified VLAN ID, the parameter is a VLAN ID list consisting of
maximum 8 VLAN IDs, the ranging is 1 to 4094
<cost-list> match the specified CoS value, the parameter is a CoS list consisting of maximum 8
CoS values, the ranging is 0 to 7
Default:
There is no match standard.
Command Mode:
Class-map Mode
Usage Guide:
Only one match standard can be configured in a class map. When configuring the ACL match,
permit rule is the match option, it will apply Policy Map action. Deny rule is the excluding option, it
does not apply Policy Map action. If it has been configured other match rule, the operation is failure,
but configuring the same match rule will cover the previous.
Example:
reate a class-map named c1, and configure the class rule of the class-map to match packets with IP
Precedence of 0.
Switch(config)#class-map c1
Switch(config-classmap-c1)#match ip precedence 0
Switch(config-classmap-c1)#exit
18-161