Configuring Ip Address Via Console - Planet IGS-6325-16T4X Quick Installation Manual

Industrial l3 multi-port gigabit managed ethernet switch
Table of Contents

Advertisement

4.2 Configuring IP Address via Console
The Industrial Managed Switch is shipped with default IP address shown
below:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch,
please use the procedure as follows:
 Display of the current IP Address
1. At the "#" prompt, enter "show ip interface brief".
IGS-6325-Series # show ip interface brief
2. The screen displays the current IP address shown in Figure 4-2.
 Configuration of the IP Address
3. At the "#" prompt, enter the following command and press <Enter> as
shown in Figure 4-3.
IGS-6325-Series# configure terminal
IGS-6325-Series (config)# interface vlan 1
IGS-6325-Series (config-if-vlan)#ip address 192.168.1.100 255.255.255.0
12
Figure 4-2: IP Information Screen

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-6325 series

Table of Contents