Planet SGS-6341 Series Command Manual page 953

47.19 permit | deny(ip standard)
Command:
{deny | permit} {{<sIpAddr> <sMask>} | any-source | {host-source <sIpAddr>}}
no {deny | permit} {{<sIpAddr> <sMask>} | any-source | {host-source <sIpAddr>}}
Functions:
Create a name standard IP access rule, and "no {deny | permit} {{<sIpAddr> <sMask>} |
any-source | {host-source <sIpAddr>}}" action of this command deletes this name standard IP
access rule.
Parameters:
<sIpAddr> is the source IP address, the format is dotted decimal notation; <sMask > is the reverse
mask of source IP, the format is dotted decimal notation.
Command Mode:
Name standard IP access-list configuration mode
Default:
No access-list configured.
Example:
Permit packets with source address 10.1.1.0/24 to pass, and deny other packets with source
address 10.1.1.0/16.
Switch(config)# access-list ip standard ipFlow
Switch(Config-Std-Nacl-ipFlow)# permit 10.1.1.0 0.0.0.255
Switch(Config-Std-Nacl-ipFlow)# deny 10.1.1.0 0.0.255.255
47.20 permit | deny(ipv6 extended)
Command:
[no] {deny | permit} icmp {{<sIPv6Prefix/sPrefixlen>} | any-source | {host-source
<sIPv6Addr>}} {<dIPv6Prefix/dPrefixlen> | any-destination | {host-destination <dIPv6Addr>}}
[<icmp-type> [<icmp-code>]] [dscp <dscp>] [flow-label <fl>][time-range <time-range-name>]
[no] {deny | permit} tcp { <sIPv6Prefix/sPrefixlen> | any-source | {host-source <sIPv6Addr> }}
[s-port { <sPort> | range <sPortMin> <sPortMax> }] { <dIPv6Prefix/dPrefixlen> |
any-destination | {host-destination <dIPv6Addr> }} [d-port { <dPort> | range <dPortMin>
<dPortMax> }] [syn | ack | urg | rst | fin | psh] [dscp <dscp> ] [flow-label <fl> ][time-range
<time-range-name> ]
47-20