Planet SGS-6341 Series Command Manual page 866

Displayed Information
(*, ff1e::15)
(2000:10:1:12::11, ff1e::15)
RPF nbr
RPF idx
Upstream State
Origin State
Local
Pruned
Asserted
Outgoing
45.2.16 show ipv6 pim neighbor
Command:
show ipv6 pim neighbor [detail|]
Function:
Display router neighbors.
Command Mode:
Admin and configuration Mode
Usage Guide:
Display multicast router neighbors maintained by the PIM.
Example:
Switch(config)#show ipv6 pim neighbor
Explanations
(*,G) Forwaridng item
(S,G) Forwarding item
Backward path neighbor, upstream neighbor of
source direction in DM, 0.0.0.0 expresses the
switch is the first hop.
Interface located in RPF neighbor
Upstream
FORWARDING(forwarding
PRUNED(Upstream
ACKPENDING(waiting for upstream response,
forwarding upstream data)
The two states:
state-refresh state),
non_transmit state-refresh state)
Join Local position joins interface, the interface
receives IGMP Join
PIM prunes interface, the interface receives Prune
messages
Asserted state
Multicast data finally exported from interface is
index number, index is 2 in this case. It can check
interface information in detail by commanding
show ip pim interface
45-12
direction, including
upstream data),
stops forwarding data),
ORIGINATOR(on transmit
NON_ORIGINATOR(on