Ipv6 Mld Snooping - Planet SGS-6341 Series Command Manual

Command Mode:
Admin Mode
Default:
The MLD Snooping Debugging of the switch is disabled by default
Usage Guide:
This command is used for enabling the switch MLD Snooping debugging, which displays the MLD
data packet message processed by the switch——packet, event messages——event, timer
messages——timer,messages of down streamed hardware entry——mfc,all debug
messages——all.

45.8.4 ipv6 mld snooping

Command:
ipv6 mld snooping
no ipv6 mld snooping
Function:
Enable the MLD Snooping function on the switch; the "no ipv6 mld snooping" command disables
MLD Snooping.
Command Mode:
Global Mode
Default:
MLD Snooping disabled on the switch by default
Usage Guide:
Enable global MLD Snooping on the switch, namely allow every VLAN to be configured with MLD
Snooping; the "no" form of this command will disable MLD Snooping on all the VLANs as well as the
global MLD snooping
Example:
Enable MLD Snooping under global mode.
Switch (config)#ipv6 mld snooping
45.8.5 ipv6 mld snooping vlan
Command:
ipv6 mld snooping vlan <vlan-id>
no ipv6 mld snooping vlan <vlan-id>
Function:
45-69