Show Lldp Traffic - Planet SGS-6341 Series Command Manual

8.19 show lldp traffic

Command:
show lldp traffic
Function:
Display the statistics of LLDP data packets.
Default:
Do not display the statistics of LLDP data packets.
Command Mode:
Admin Mode, Global Mode.
Usage Guide:
Users can check the statistics of LLDP data packets by using "show lldp traffic".
Example:
Check the statistics of LLDP data packets after LLDP is enabled on the switch.
Switch(config)#show lldp traffic
PortName Ageouts
TLVsDiscarded TLVsUnrecognized --------------
-------- ---------
Ethernet1/1 0
0
FramesDiscarded
------------- ----------------
0
8-12
FramesInErrors FramesIn
------- ---------------
0 0
FramesOut
--------------
7 0