Planet SGS-6341 Series Command Manual page 731

Iif
Wrong
Oif
TTL
44.2 Commands for PIM-DM
44.2.1 debug pim timer sat
Command:
debug pim timer sat
no debug pim timer sat
Function:
Enable debug switch of PIM-DM source activity timer information in detail; the "no debug pim timer
sat" command disenables the debug switch.
Default:
Disabled.
Command Mode:
Admin Mode.
Usage Guide:
Enable the switch, and display source activity timer information in detail.
Example:
Switch # debug ip pim timer sat
Remark:
Other debug switches in PIM-DM are common in PIM-SM, including debug pim event, debug pim
packet, debug pim nexthop, debug pim nsm, debug pim mfc, debug pim timer, debug pim state,
refer to PIM-SM handbook.
44.2.2 debug pim timer srt
Command:
debug pim timer srt
no debug pim timer srt
Function:
Enable debug switch of PIM-DM state-refresh timer information in detail; the "no debug pim timer
srt" command disenables the debug switch.
ingress interface of the entries
packets received from the wrong interface
egress interface of the entries
the value of TTL
44-7