Planet SGS-6341 Series Command Manual page 871

45.3.7 debug ipv6 pim packet
Command:
debug ipv6 pim packet [in|out|]
no debug ipv6 pim packet [in|out|]
Function:
Enable or Disable PIM debug switch.
Parameter:
in display only received PIM packets
out display only transmitted PIM packets
none display both
Default:
Disabled
Command Mode:
Admin Mode.
Usage Guide:
Inspect the received and transmitted PIM packets by this switch.
Example:
Switch# debug ipv6 pim packet in
45.3.8 debug ipv6 pim state
Command:
debug ipv6 pim state
no debug ipv6 pim state
Function:
Enable or Disable PIM debug switch.
Default:
Disabled
Command Mode:
Admin Mode.
Usage Guide:
Inspect the changing information about PIM state by this switch.
Example:
Switch# debug ipv6 pim state
45-17