Hello due in 00:00:16
Neighbor Count is 0, Adjacent neighbor count is 0
35.58 show ip ospf neighbor
Command:
show ip ospf [<process-id>] neighbor [{<neighbor_id> |all |detail [all] |interface <ifaddress>}]
Function:
Display the OSPF adjacent point messages.
Parameter:
<process-id> is the process ID ranging between 0~65535
<neighbor_id> is the dotted decimal notation neighbor ID
all: Display messages of all neighbors
detail: Display detailed messages of all neighbors
<ifaddress> Interface IP address
Default:
Not displayed
Command Mode:
Admin and configuration mode
Usage Guide:
OSPF neighbor state can be checked by viewing the output of this command.
Example:
Switch#show ip ospf neighbor
OSPF process 0:
Neighbor ID
192.168.1.1
192.168.1.3
192.168.1.3
Displayed information
Neighbor ID
Priority
State
Dead time
Address
Interface
Pri
State
Dead Time
1
Full/Backup
1
Full/DR
1
Full/ -
00:00:30
35-225
Address
00:00:32
6.1.1.1
00:00:36
20.1.1.3
20.1.1.3
Explanation
ID Neighbor ID
Priority
Neighbor relation state
Neighbor dead time
Interface Address
Interface name
Interface
Vlan1
Vlan2
VLINK2