Show Snmp Engineid - Planet SGS-6341 Series Command Manual

number of requested variable
number of altered variables
get-request PDUs
get-next PDUs
set-request PDUs
snmp packets output
too big errors
maximum packet size
no such name errors
bad values errors
general errors
response PDUs
trap PDUs

1.4.6 show snmp engineid

Command:
show snmp engineid
Function:
Display the engine ID commands.
Command Mode:
Admin and Configuration Mode.
Example:
Switch#show snmp engineid
SNMP engineID:3138633303f1276c
Displayed Information
SNMP engineID
Engine Boots
Number of variables requested by NMS.
Number of variables set by NMS.
Number of packets received by "get" requests.
Number of packets received by "getnext"
requests.
Number of packets received by "set" requests.
Total number of SNMP packet outputs.
Number of "Too_ big" error SNMP packets.
Maximum length of SNMP packets.
Number of packets requesting for non-existent
MIB objects.
Number of "Bad_values" error SNMP packets.
Number of "General_errors" error SNMP packets.
Number of response packets sent.
Number of Trap packets sent.
Engine Boots is:1
Explanation
Engine number
Engine boot counts
1-85
SGS-6341 Series Command Guide