Planet SGS-6341 Series Command Manual page 960

access-list 3100 deny any-source-mac any-destination-mac udp any-source s-port 100
any-destination d-port 40000
Displayed information
access-list 10(used 1 time(s))
access-list 10 deny any-source
access-list 100(used 1 time(s))
access-list 100
any-destination
access-list 100
any-destination
access-list 1100
any-destination-mac tagged-eth2 14 2 0800
access-list 3100
any-destination-mac udp any-source s-port
100 any-destination d-port 40000
47.25 show access-group
Command:
show access-group in (interface {Ethernet | Ethernet IFNAME})
Functions:
Display the ACL binding status on the port.
Parameters:
IFNAME, Port name.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
When not assigning interface names, all ACL tied to port will be revealed.
Examples:
Switch#show access-group
interface name: Ethernet 1/0/1
deny ip any-source
deny tcp any-source
permit any-source-mac
permit any-source-mac
47-27
Explanation
Number ACL10, 0 time to be used
Deny any IP packets to pass
Nnumber ACL10, 1 time to be used
Deny IP packet of any source IP address and
destination address to pass
Deny TCP packet of any source IP address and
destination address to pass
Permit tagged-eth2 with
addresses and any destination MAC addresses
and the packets whose 15th and 16th byte is
respectively 0x08 , 0x0 to pass
Deny the passage of UDP packets
source MAC address and destination MAC
address, any source IP address and destination
IP address, and source port 100 and destination
interface 40000
any source MAC
with any