Planet SGS-6341 Series Command Manual page 322

19.1.7 ip vrf forwarding vrfName
Command:
ip vrf forwarding <vrfName>
no ip vrf forwarding <vrfName>
Function:
Relate the interface to the specific VRF.
Parameters:
<vrf-name>: Configure the name of VPN instance, the length is less than 32 characters.
Default:
Bind the interface to the master VRF.
Command mode:
Interface configuration mode.
Usage Guide:
If the interface needs to access internet, this command can be configured and an interface bind a
VRF only, but a VRF can bind multiple interfaces.
Example:
Switch(config)#int vlan 9
Switch(Config-if-Vlan9)#ip vrf forwarding vpn1
19.1.8 rd
Command:
rd <ASN:nn_or_IP-address:nn>
Function:
Configure RD(Route Distinguish) of VRF.
Parameters:
ASN:nn_or_IP-address:nn is the IP address format of the route identification label.
Default:
Not configured.
Command mode:
VRF mode
Usage Guide:
The configured RD is for identifying different VPN each of which shall have a unique RD, VPN
instance implement the space independence and address repeat through RD. But attention should
be paid on that this setting is made up by AS number and a arbitrary number and RD can not be
deleted directly.
19-168