Show Dot1X - Planet SGS-6341 Series Command Manual

Switch(config)#interface ethernet 1/0/1
Switch(Config-If-Ethernet1/0/1)#dot1x enable

48.24 show dot1x

Command:
show dot1x [interface <interface-list>]
Function:
Displays dot1x parameter related information, if parameter information is added, corresponding
dot1x status for corresponding port is displayed.
Parameters:
<interface-list> is the port list. If no parameter is specified, information for all ports is displayed.
Command mode:
Admin and Configuration Mode.
Usage Guide:
The dot1x related parameter and dot1x information can be displayed with "show dot1x" command.
Example:
1. Display information about dot1x global parameter for the switch.
Switch#show dot1x
Global 802.1x Parameters
reauth-enabled
reauth-period
quiet-period
tx-period
max-req
authenticator mode
Mac Filter Disable
MacAccessList :
dot1x-EAPoR Enable
dot1x-privateclient Disable
dot1x-unicast Disable
802.1x is enabled on ethernet Ethernet1/0/1
Authentication Method:Port based
Max User Number:1
no
3600
10
30
2
passive
48-16