Planet SGS-6341 Series Command Manual page 942

{{ <destination> <destination-wildcard> }|any-destination| {host-destination
<destination-host-ip> }}[d-port{ <port3> | range <dPortMin> <dPortMax> }]
[precedence <precedence> ] [tos <tos> ][time-range <time-range-name> ]
access-list <num> {deny|permit}{any-source-mac| {host-source-mac
<host_smac> }|{ <smac> <smac-mask> }} {any-destination-mac|{host-destination-mac
<host_dmac> }|{ <dmac> <dmac-mask> }} {eigrp|gre|igrp|ip|ipinip|ospf|{ <protocol-num> }}
{{ <source> <source-wildcard> }|any-source|{host-source <source-host-ip> }}
{{ <destination> <destination-wildcard> }|any-destination| {host-destination
<destination-host-ip> }} [precedence <precedence> ] [tos <tos> ][time-range
<time-range-name> ]
Functions:
Define an extended numeric MAC-IP ACL rule, no command deletes a extended numeric MAC-IP
ACL access-list rule.
Parameters:
num access-list serial No. this is a decimal's No. from 3100-3299; deny if rules are matching, deny
to access; permit if rules are matching, permit to access; any-source-mac: any source MAC
address; any-destination-mac: any destination MAC address; host_smac , smac: source MAC
address; smac-mask: mask (reverse mask) of source MAC address ; host_dmac , dmas
destination MAC address; dmac-mask mask (reverse mask) of destination MAC address; protocol
No. of name or IP protocol. It can be a key word: eigrp, gre, icmp, igmp, igrp, ip, ipinip, ospf, tcp, or
udp, or an integer from 0-255 of list No. of IP address. Use key word 'ip' to match all Internet
protocols (including ICMP, TCP, AND UDP) list; source-host-ip, source No. of source network or
source host of packet delivery. Numbers of 32-bit binary system with dotted decimal notation
expression; host: means the address is the IP address of source host, otherwise the IP address of
network; source-wildcard: reverse of source IP. Numbers of 32-bit binary system expressed by
decimal's numbers with four-point separated, reverse mask; destination-host-ip, destination No. of
destination network or host to which packets are delivered. Numbers of 32-bit binary system with
dotted decimal notation expression; host: means the address is the that the destination host
address, otherwise the network IP address; destination-wildcard: mask of destination.
Numbers of 32-bit binary system expressed by decimal's numbers with four-point separated,
reverse mask; s-port(optional): means the need to match TCP/UDP source port; port1(optional):
value of TCP/UDP source interface No., Interface No. is an integer from 0-65535; d-port(optional):
means need to match TCP/UDP destination interface; <sPortMin>, the down boundary of source
port; <sPortMax>, the up boundary of source port; port3(optional): value of TCP/UDP destination
interface No., Interface No. is an integer from 0-65535; <dPortMin>, the down boundary of
destination port;<dPortMax>, the up boundary of destination port; [ack] [fin] [psh] [rst] [urg]
[syn],(optional) only for TCP protocol, multi-choices of tag positions are available, and when TCP
data reports the configuration of corresponding position, then initialization of TCP data report is
47-9
I