Dot1Q-Tunnel Enable - Planet SGS-6341 Series Command Manual

Parameter:
receive, enabling the debugging of receiving GVRP packet
send, enabling the debugging of sending GVRP packet
ethernet, physical port
port-channel, aggregate port
IFNAME, port name
Command mode:
Admin Mode.
Default:
GVRP packet debugging is disabled.
Usage Guide:
Use this command to enable the debugging of GVRP packet.
Example:
Show information of sending and receiving GVRP packet.
Switch(config)#debug gvrp packet receive interface ethernet 1/0/1
Receive packet, smac 00-21-27-aa-0f-46, dmac 01-80-C2-00-00-21,
length 90, protocol ID:1,attribute type:0x01,
Attribute Index
--------------------
1
2
3
4

12.1.3 dot1q-tunnel enable

Command:
dot1q-tunnel enable
no dot1q-tunnel enable
Function:
Set the access port of the switch to dot1q-tunnel mode; the "no dot1q-tunnel enable" command
restores to default.
Command Mode:
Port Mode.
Default:
Dot1q-tunnel function disabled on the port by default.
Length Event
--------- -------
10 joinIn
10 joinEmpty
10 leaveIn
10 leaveEmpty
12-47
Value
-------
100
140
150
180