Planet SGS-6341 Series Command Manual page 708

Chapter 41 Commands for BFD
41.1 bfd authentication key
Command:
bfd authentication key <1-255>
no bfd authentication key
Function:
Enable BFD authentication and configure key for interface, no command disables BFD
authentication.
Parameter:
<1-255>- key ID.
Default:
Do not enable BFD authentication for interface.
Command Mode:
interface configuration mode
Usage Guide:
Configure key ID of BFD interface, different interfaces can use different way to encrypt and
authenticate. Output: the specific BFD interface use encryption authentication.
Example:
Enable BFD authentication on interface, key ID is 1.
s5(config-if-vlan50)#bfd authentication key 1
41.2 bfd authentication key md5
Command:
bfd authentication key <1-255> md5 <WORD>
no bfd authentication key <1-255>
Function:
Configure key and authentication character string encrypted with md5 method for BFD, no
command deletes the configured key.
Parameter:
<1-255> key ID, <WORD> key string, length from 1 to 16 bytes
Default:
No key and character string are configured.
41-1