Show Ip Bgp Regexp - Planet SGS-6341 Series Command Manual

37.100 show ip bgp regexp

Command:
show ip bgp [<ADDRESS-FAMILY>] regexp [<LINE>]
Function:
For displaying the BGP routes meets specific AS related normal expressions.
Parameter:
<ADDRESS-FAMILY>: >: address-family such as "ipv4 unicast"
<LINE>: Regular expression
Command Mode:
Admin and configuration mode
Usage Guide:
We can select BGP route of the required AS with normal expression.
Example:
Switch#sh ip bgp regexp 100
BGP table version is 2, local router ID is 11.1.1.100
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
Origin codes: i - IGP, e - EGP, ? - incomplete
Network
* 100.1.1.0/24
Total number of prefixes 1
37.101 show ip bgp route-map
Command:
show ip bgp [<ADDRESS-FAMILY>] route-map [<NAME>]
Function:
For displaying the BGP routes meets the specific related route map.
Parameter:
<ADDRESS-FAMILY>: such as "ipv4 unicast"
<NAME>: Name of route map
Command Mode:
Admin and configuration mode
Usage Guide:
Configure the route map with the route-map command, through which it can be displayed that
S Stale
Next Hop
10.1.1.64
Metric LocPrf Weight Path
0
37-327
0 500 100 600 ?