Planet SGS-6341 Series Command Manual page 927

command.
Example:
Switch(config)#ipv6 mld snooping vlan 2 mrouter-port interface ethernet1/0/13
45.8.10 ipv6 mld snooping vlan mrouter-port learnpim6
Command:
ipv6 mld snooping vlan <vlan-id> mrouter-port learnpim6
no ipv6 mld snooping vlan <vlan-id> mrouter-port learnpim6
Function:
Enable the function that the specified VLAN learns mrouter-port (according to pimv6 packets), the
no command will disable the function.
Parameter:
<vlan-id>: The specified VLAN ID, ranging from 1 to 4094.
Command Mode:
Global Mode
Default:
Enable
Usage Guide:
Enable the function that the specified VLAN learns mrouter-port (according to pimv6 packets). After
a port received pimv6 packets, it will be set to mrouter port for implementing the automatic learning.
Example:
Disable the function that vlan 100 learns mrouter-port (according to pimv6 packets).
Switch(config)#no ipv6 mld snooping vlan 100 mrouter-port learnpim6
45.8.11 ipv6 mld snooping vlan mrpt
Command:
ipv6 mld snooping vlan <vlan-id> mrpt <value>
no ipv6 mld snooping vlan <vlan-id> mrpt
Function:
Configure the keep-alive time of the mrouter port.
Parameter:
vlan-id: VLAN ID, the valid range is <1-4094>
value: mrouter port keep-alive time with a valid range of <1-65535> secs.
Command Mode:
45-73