Planet SGS-6341 Series Command Manual page 609

Switch(config-router)#redistribute bgp metric 12 metric-type 1
36.27 redistribute ospf
Command:
redistribute ospf [<process-tag>] [metric<value>] [metric-type {1|2}] [route-map<word>]
no redistribute ospf [<process-tag>] [metric<value>] [metric-type {1|2}][route-map<word>]
Function:
To redistribute routing information form process-tag to this command. The no form of command
cancels the redistribution of process-tag routing to this process. When input the optional parameters
of metric, metric type and routermap, then restores default configuration.
Parameter:
process-tag is the process ID of IPv6 OSPF process, NULL by default.
metric <value> is the metric for redistributed routing, range between 0 to 16777214.
metric-type {1|2} is the metric type for redistributed routing, only can be 1 or 2, and 2 by default.
route-map <word> is the pointer to the introduced routing map.
Default:
Not redistributed any OSPFfv3 routing by default.
Command Mode:
Router IPv6 OSPF Configuration Mode.
Usage Guide:
When process-id is not input, that means OSPFv3 routing will be redistributed by default
(Process-tag is NULL). The no form of command input the optional parameters of metric,
metric-type and routermap, then restores default configuration. When not input any optional
parameters that mean to delete the router of redistributed process.
Example:
Switch(config)#router ipv6 ospf
Switch(config-router)#redistribute ospf
36.28 router-id
Command:
router-id <router-id>
no router-id
Function:
36-248