Planet SGS-6341 Series Command Manual page 781

no redistribute
Function:
To configure the redistribute of SA messages.
Parameter:
acl-number: specified advanced ACL number (100-199).
acl-name: specified ACL name.
Command Mode:
MSDP Configuration Mode.
Default:
When set up SA message, announce all the source within fired, but not confine the (S, G) item.
Usage Guide:
If ACL list number is specified, only the (S, G) entries which have passed the ACL check will be
advertised in the SA messages. If no ACL is specified, no (S, G) entry will be advertised in the SA
messages.
Example:
Switch(config)#router msdp
Switch(router-msdp)#redistribute list 130
44.4.24 remote-as
Command:
remote-as <as-num>
no remote-as <as-num>
Function:
To configure AS number of specified MSDP Peer.
Parameter:
as –num: AS number, range from 1 to 65535.
Command Mode:
MSDP Peer Configuration Mode.
Default:
The AS number isn't initialized to 0 by default.
Usage Guide:
This command set the AS number for specified Peer. The no command restores the AS number of
specified MSDP Peer.
Example:
Switch(config)#router msdp
Switch(router-msdp)#peer 20.1.1.1
44-57