Planet SGS-6341 Series Command Manual page 493

31.32 show route-map
Command:
show route-map
Function:
Show the content of route-map.
Command Mode:
Admin mode
Example:
Switch# show route-map
route-map a, deny, sequence 10
Match clauses:
as-path 60
Set clauses:
metric 10
Displayed information
route-map a, deny, sequence 10
Match clauses:
as-path 60
Set clauses:
metric 10
31.33 show router-id
Command:
show router-id
Function:
Show the content of router-id.
count:0 means the rule has been matched for zero
times. And refcount:0 means the rule is referenced
for zero times.
Explanation
route-map a means the name of route map is a,
deny means the deny mode, sequence 10 means
the sequence number is 10
Match sub
Detailed contents in the Match sub
Set sub
Detailed content in the Set clause
31-132