Planet SGS-6341 Series Command Manual page 740

Command:
show ip pim mroute dense-mode [group <A.B.C.D>] [source <A.B.C.D>]
Function:
Display PIM-DM message forwarding items.
Parameter:
group <A.B.C.D>: displays forwarding items relevant to this multicast address.
source <A.B.C.D>: displays forwarding items relevant to this source.
Default:
Do not display (Off).
Command Mode:
Admin Mode
Usage Guide:
The command shows PIM-DM multicast forwarding items, namely forwarding items of forward
multicast packet in system FIB table.
Example:
Display all of PIM-DM message forwarding items.
Switch(config)#show ip pim mroute dense-mode
IP Multicast Routing Table
(*,G) Entries: 1
(S,G) Entries: 1
(*, 226.0.0.1)
Local ..l.............................
(192.168.1.12, 226.0.0.1)
RPF nbr: 0.0.0.0
RPF idx: Vlan2
Upstream State: FORWARDING
Origin State: ORIGINATOR
Local ................................
Pruned ................................
Asserted ................................
Outgoing ..o.............................
Switch#
Displayed Information Explanations
44-16