Planet SGS-6341 Series Command Manual page 330

19.2.8 debug ipv6 tunnel packet
Command:
debug ipv6 tunnel packet
no debug ipv6 tunnel packet
Function:
tunnel data packets receive/send debug message.
Parameter:
None
Default:
None
Command Mode:
Admin Mode
Example:
Switch#debug ipv6 tunnel packet
IPv6 tunnel: rcvd, type <136>, src <fe80::203:fff:fe01:2786>, dst <fe80::203:fff:fe01:59ba>
IPv6 tunnel packet : rcvd src 178.1.1.1 dst 179.2.2.2 size 128 from tunnel1
Displayed information
IPv6 tunnel packet : rcvd
type <136>
Src 178.1.1.1 dst
Dst 179.2.2.2
19.2.9 description
Command:
description <desc>
no description
Function:
Configure the tunnel description. The no operation of this command will delete the tunnel
description.
Parameters:
<desc> is the tunnel description, its length can not exceed 256 characters.
Command Mode:
Tunnel Configuration Mode.
Default:
Explanation
Receive tunnel data report
ND type
Tunnel source IPv4 address
Tunnel destination IPv4 address
19-176