Planet SGS-6341 Series Command Manual page 766

Command:
show ip pim neighbor
Function:
Display router neighbors
Command Mode:
Admin Mode and Global Mode
Usage Guide:
Display multicast router neighbors maintained by the PIM
Example:
Switch (config)#show ip pim neighbor
Neighbor
Address
10.1.6.1
10.1.6.2
10.1.4.2
10.1.4.3
Displayed Information
Neighbor Address
Interface
Uptime/Expires
Ver
DR Priority/Mode
44.3.37 show ip pim nexthop
Command:
show ip pim nexthop
Function:
Display the PIM buffered nexthop router in the unicast route table
Command Mode:
Admin Mode and Global Mode
Usage Guide:
Display the PIM buffered nexthop router information.
Example:
Example:
Interface Uptime/Expires
Vlan1 00:00:10/00:01:35 v2
Vlan1 00:00:13/00:01:32 v2
Vlan3 00:00:18/00:01:30 v2
Vlan3 00:00:17/00:01:29 v2
44-42
Ver DR
1 /
1 /
1 /
1 /
Explanations
Neighbor address
Neighbor interface
Running time /overtime
Pim version ,v2 usually
DR priority in the hello messages from the
neighbor and if the neighbor is the interface's DP.
Priority/Mode