Planet SGS-6341 Series Command Manual page 633

Limit the number of routers learnt by the bgp process from its neighbors with this command.
Example:
The following configuration will limit max number of routers that the bgp process receives from its
neighbors as 20000.
Switch(config-router)# bgp inbound-max-route-num 20000
37.21 bgp log-neighbor-changes
Command:
bgp log-neighbor-changes
no bgp log-neighbor-changes
Function:
Output log message when BGP neighbor changes. The "no bgp log-neighbor-changes"
command cancels this configuration.
Default:
Not configured.
Command Mode:
BGP route mode
Usage Guide:
Can display neighbor change messages on the monitor.
Example:
Switch(config-router)# bgp log-neighbor-changes
37.22 bgp network import-check
Command:
bgp network import-check
no bgp network import-check
Function:
Set whether check the IGP accessibility of the BGP network route or not. The "no bgp network
import-check" command sets to not checking the IGP accessibility.
Default:
Not configured.
Command Mode:
BGP route mode
37-272