Planet SGS-6341 Series Command Manual page 634

Usage Guide:
Checking the IGP accessibility of the route advertised by BGP is to check the existence of next-hop
and its IGP accessibility.
Example:
Set to check the IGP accessibility of BGP network route.
Switch(config-router)# bgp network import-check
37.23 bgp rfc1771-path-select
Command:
bgp rfc1771-path-select
no bgp rfc1771-path-select
Function:
After this attribute is set, path selecting will follow the way defined in rfc 1771, namely not checking
the AS internal metric, or comparing the internal METRIC.
Default:
Following
Command Mode:
Global mode
Usage Guide:
After this attribute is set, path selecting will follow the way defined in rfc 1771, namely not checking
the AS internal metric, when different AS exist, which should be perform without this attribute set.
Example:
Configure to follow the rfc1771 path selecting.
Switch(config)# bgp rfc1771-path-select
37.24 bgp rfc1771-strict
Command:
bgp rfc1771-strict
no bgp rfc1771-strict
Function:
Set whether strictly follows the rfc1771 restrictions. The "no bgp rfc1771-strict" command set to
not strictly following.
Default:
37-273