Planet SGS-6341 Series Command Manual page 690

show ip bgp [<ADDRESS-FAMILY>] summary
Function:
For displaying the BGP summary information.
Parameter:
<ADDRESS-FAMILY>: Address-family such as "ipv4 unicast".
Command Mode:
Admin and configuration mode
Usage Guide:
Display some basic summary information of BGP.
Example:
Switch#show ip bgp summary
BGP router identifier 10.1.1.66, local AS number 200
BGP table version is 1
1 BGP AS-PATH entries
0 BGP community entries
Neighbor V
10.1.1.68 4
Total number of neighbors 1
Display Contents
identifier
local AS number
table version
AS-PATH entries
community entries
Neighbor
V
AS
MsgRcvd
MsgSent
TblVer
Up/Down
State/PfxRcd
AS MsgRcvd MsgSent
300 0 0
Explanation
Local identifier
The number of AS of local router
the version number of BGP interior database
The tabulation of the AS-PATH entries
The property of the community entries
Neighbor address
The BGP version of neighbor running
The AS number of neighbor what is affiliated with
The amount of message received from neighbor
The amount of message sent to the neighbor
the version of route table
It will display the conversation time length if the state with
neighbor was established, otherwise display the present
status.
If the state is established, display the amount of the prefix
received of the router.otherwise,display the state of the
neighbor at present.
37-329
TblVer InQ OutQ Up/Down State/PfxRcd
0 0 0 never Active