Planet SGS-6341 Series Command Manual page 483

31.16 set as-path
Command:
set as-path prepend <as-num>
no set as-path prepend [<as-num>]
Function:
Add AS numbers in the AS path domain of the BGP routing message. The "no set as-path
prepend [<as-num>]" command deletes this configuration.
Parameter:
<as-num > is the AS number, circulating inputting several numbers is available.
Command Mode:
route-map mode
Usage Guide:
To add AS number in the As domain of the BGP, the AS path length should be lengthened so to
affect the best neighbor path option. To use this command, one match clause should at first be
defined.
Example:
Switch#config terminal
Switch(config)#route-map r1 permit 5
Switch(config-route-map)#set as-path prepend 200 100.100
31.17 set atomic-aggregate
Command:
set atomic-aggregate
no set atomic-aggregate
Function:
Configure the atomic aggregate attributes. The "no set atomic-aggregate" command deletes this
configuration.
Command Mode:
route-map mode
Usage Guide:
The BGP informs other BGP speaker by the atomic aggregate attributes. Local system selects a
sub-specified route other than the more specified routes included in it. To use this command, one
match clause should at first be defined.
Example:
31-122