Planet SGS-6341 Series Command Manual page 254

setting.
Parameter:
<name> is the MSTP region name. The length of the name should be less than 32 characters.
Command mode:
MSTP Region Mode
Default:
Default MSTP region name is the MAC address of this bridge.
Usage Guide:
This command is to set MSTP region name. The bridges with same MSTP region name and same
other attributes are considered in the same MSTP region.
Example:
Set MSTP region name to mstp-test.
Switch(config)#spanning-tree mst configuration
Switch(Config-Mstp-Region)#description mstp-test
14.1.5 no
Command:
no <instance-id> | <name> | <revision-level>
Function:
Cancel one command or set it as initial value.
Parameter:
<instance-id> instance number, <name> MSTP region name, <revision-level> is account the
modify value of MST configuration caption.
Command mode:
MSTP Region Mode
Default:
The default revision level is 0.
Usage Guide:
This command deletes the specified instance and MSTP region name, restore the default of modify
value is 0.
Example:
Delete instance 1.
Switch(Config-Mstp-Region)#no instance 1
14-100