Show Ssh Algorithm - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To enable an SSH server public key algorithm:
DGS-3620-28PC:admin#config ssh algorithm DSA enable
Command: config ssh algorithm DSA enable
Success.
DGS-3620-28PC:admin#
101-2

show ssh algorithm

Description
This command is used to display the SSH authentication algorithm.
Format
show ssh algorithm
Parameters
None.
Restrictions
None.
Example
To show the SSH server algorithms:
DGS-3620-28PC:admin#show ssh algorithm
Command: show ssh algorithm
Encryption Algorithm
--------------------------
3DES : Enabled
AES128 : Enabled
AES192 : Enabled
AES256 : Enabled
arcfour : Enabled
blowfish : Enabled
cast128 : Enabled
twofish128 : Enabled
twofish192 : Enabled
twofish256 : Enabled
Data Integrity Algorithm
--------------------------
MD5 : Enabled
1124