Update-Gkey-On-Leave (Security-Suite Ess) - D-Link xStack DWS-3200 Series Cli Manual

update-gkey-on-leave (Security-Suite ESS)

The update-gkey-on-leave Security-Suite ESS Configuration mode command defines that a group key should be
updated after a station leaves the AP. To disable updates, use the no form of this command.
Syntax
update-gkey-on-leave
no update-gkey-on-leave
Parameters
This command has no keywords or arguments.
Default Configuration
No key is defined.
Command Mode
Security-Suite ESS Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines that a group key should be updated after a station leaves the AP.
Console (Config-wlan-ess)# security suite configure wpa
Console (Config-ess-security)# update-gkey-on-leave
update-gkey-on-leave (Security-Suite ESS)
Page 528
Wireless ESS Commands