Time > Clock Settings; Time > Sntp Settings - D-Link DGS-1210 Series Manual

5 Surveillance Mode Configuration
Date
Click the Add button to create a new time profile for PoE scheduling.
Click the Delete button to remove the specified profile entry.
The fields that can be configured in the PoE Configuration section are described below:
Parameter
From Port / To Port
Time Profile
Click the Apply button to implement changes made.
Click the Delete button to remove the time range schedule from the specified port.
Time > Clock Settings
This Clock Settings page allows user to configure the time on the Switch.
The fields that can be configured for Clock Settings are described below:
Parameter
Time (HH:MM:SS)
Date (DD/MM/YYYY)
Click the Apply button to implement changes made.
Time > SNTP Settings
The SNTP Settings page allows user to configure an external time source on the switch. Simple Network
Time Protocol (SNTP) is a lightweight version of the NTP protocol and can be used to keep the system clock
in-sync by using a network-based time source.
The fields that can be configured for SNTP Global Settings are described below:
Parameter
Tick the Date and select the From Day / To Day for the scheduling.
Description
Select the port range to be used.
Select the time profile to be used.
Figure 5.12 – Surveillance Mode > Time > Clock Settings
Description
Set the system time with the format (HH:MM:SS).
Set the date with the format (DD/MM/YYYY).
Figure 5.13 – Surveillance Mode > Time > SNTP Settings
Description
1 3
1 3
D-Link Smart Managed Switch User Manual
7
7