Table of Contents
Advertisement
Device Reset
If you have any problems accessing the DIS-F200G, it can be reset using the following
instructions:
Press and hold the reset button for 2 to 10 seconds. After releasing the button the SYS LED
light will stop flashing and after a moment will start flashing rapidly indicating a restart.
After restart the DIS-F200G will be reset to factory defaults.
Additional Information
You can refer to the user manual or visit https://support.dlink.com.au/ for more support.
SAFETY INSTRUCTIONS
The following general safety guidelines are provided to help ensure your own
personal safety and protect your product from potential damage. Remember to
consult the product user instructions for more details.
•
Static electricity can be harmful to electronic components. Discharge static
electricity from your body (i.e. touching grounded bare metal) before touching
the product.
•
Do not attempt to service the product and never disassemble the product.
For some products with user replaceable battery, please read and follow the
instructions in the user manual.
•
Do not spill food or liquid on your product and never push any objects into
the openings of your product.
•
Do not use this product near water, areas with high humidity or condensation
unless the product is specifically rated for outdoor application.
•
Keep the product away from radiators and other heat sources.
•
Always unplug the product from mains power before cleaning and use a dry
lint free cloth only.
QUICK INSTALLATION GUIDE | DIS-F200G SERIES
8
Advertisement
Table of Contents
