Snmp-Server Contact - D-Link DGS-6600-48TS Manual

DGS-6604 m

snmp-server contact

snmp-server contact TEXT
no snmp-server contact
Syntax Description
contact TEXT
Default
Command Mode
Usage Guideline
Example
Switch(config)# snmp-server contact MIS Department II
CLI Reference Guide
Use this command to configure the system's snmp contact information. Use the
no form of this command to remove the configuration of system contact
information.
String that describes the system contact information.The maximum length is 255
characters (please refer to RFC1213 for the maximum length in detail). The
syntax is a general string that allows space.
None
Global configuration
Configures the system's snmp contact information on the switch.
This example shows how to set the system's snmp contact information as the
string MIS Department II.
Verify the settings by entering the show snmp-server command.
snmp-server contact
844