Snmp-Server Contact - D-Link xStack DWS-3200 Series Cli Manual

DXS/DWS-3200 series CLI Reference Guide

snmp-server contact

The snmp-server contact Global Configuration mode command configures the system contact (sysContact)
string. To remove system contact information, use the no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
Parameters
•
text — Specifies the string that describes system contact information. (Range: 1-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following example configures the system contact point called D-Link_Technical_Support.
console(config)# snmp-server contact D-Link_Technical_Support
Page 289