Dhcp Snooping - D-Link Xstack DES-3528 Series Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Web UI Reference Guide
Click the Delete All button to remove all the entries listed.

DHCP Snooping

DHCP Snooping Maximum Entry Settings
Users can configure the maximum DHCP snooping entry for ports on this page.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > DHCP Snooping > DHCP Snooping
Maximum Entry Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Maximum Entry (1-50)
Maximum IPv6 Entry
(1-50)
Click the Apply button to accept the changes made.
DHCP Snooping Entry
This window is used to view dynamic entries on specific ports.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > DHCP Snooping > DHCP Snooping Entry,
as shown below:
Figure 8-28 DHCP Snooping Maximum Entry Settings window
Description
Select a unit to configure.
Use the drop-down menus to select a range of ports to use.
Enter the maximum entry value. Tick the No Limit check box to have unlimited
entries.
Enter the maximum IPv6 entry value. Tick the No Limit check box to have unlimited
entries.
233