Adding Interfaces To The Dhcp Snooping Database - D-Link xStack DXS-3250E Web/Installation Manual

DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide

Adding Interfaces to the DHCP Snooping Database

The DHCP Snooping Binding Database Page contains parameters for querying and adding IP addresses to the
DHCP Snooping Database. To query or add IP addresses:
1. Click System > Management Security > DHCP Snooping > Binding Snooping Database. The DHCP
Snooping Binding Database Page opens:
Figure 59: DHCP Snooping Binding Database Page
The DHCP Snooping Binding Database Page contains the following fields:
To query the DHCP Snooping Database select the following categories:
•
MAC Address — Indicates the MAC addresses recorded in the DHCP Snooping Database.
•
IP Address — Indicates the IP addresses recorded in the DHCP Snooping Database.
•
VLAN — Indicates the VLANs recorded in the DHCP Snooping Database.
•
Interface — Contains a list of interfaces recorded in the DHCP Snooping Database. The possible field values
are:
–
Port — Queries the DHCP Snooping Database.
–
LAG — Queries the DHCP Snooping Database.
•
VLAN ID — Displays the VLAN ID to which the IP address is attached in the DHCP Snooping Database.
•
Type — Displays the IP address binding type. The possible field values are:
–
Static — Indicates the IP address was statically configured.
–
Dynamic — Indicates the IP address was dynamically configured.
Page 108