Table of Contents
Advertisement
4 Configuration
The fields that can be configured are described below:
Item
From Port / To Port
VID
MAC Address
Click Apply to make the configurations take effect.
Click Delete All to delete all the entries found in the display table.
Click Delete to remove the corresponding entry.
L2 Features > FDB > MAC Address Table Settings
This window allows user to view and configure the MAC address learning function.
The fields that can be configured for MAC Address Learning are described below:
Item
From Port / To Port
State
Click Apply to make the configurations take effect.
Figure 4. 28 - L2 Features > FDB > Static FDB > Multicast Static FDB
Description
Select the appropriate port range used for the configuration.
Enter the VLAN ID of the VLAN which the corresponding MAC
address belongs to.
Enter the static destination MAC address of the multicast packets.
This must be a multicast MAC address. The format of the
destination MAC address is 01-XX-XX-XX-XX-XX.
Figure 4.29 - L2 Features > FDB > MAC Address Table Settings
Description
Select the appropriate port range used for the configuration.
Specify to enable or disable the MAC address learning function.
The default is Enabled.
D-Link Smart Managed Switch User Manual
Table 4.13
Table 4.14
22
Advertisement
Table of Contents
