Edge-Core ECS4660-28F Management Manual page 653

The switch supports a maximum of 64 static group entries.
◆
P
ARAMETERS
These parameters are displayed:
VLAN – VLAN interface to assign as a static member of the specified
◆
multicast group. (Range: 1-4094)
◆ Static Group Address – An IP multicast group address. (The group
addresses specified cannot be in the range of 224.0.0.1 -
239.255.255.255.)
Source Address – The source address of a multicast server
◆
transmitting traffic to the specified multicast group address.
W I
EB NTERFACE
To configure static IGMP groups:
Click Multicast, IGMP, Static Group.
1.
Select Add from the Action list.
2.
Select a VLAN interface to be assigned as a static multicast group
3.
member, and then specify the multicast group. If source-specific
multicasting is supported by the next hop router in the reverse path
tree for the specified multicast group, then the source address should
also be specified.
Click Apply.
4.
Figure 371: Configuring Static IGMP Groups
To display configured static IGMP groups:
Click Multicast, IGMP, Static Group.
1.
Select Show from the Action list.
2.
Click Apply.
3.
– 653 –
C
HAPTER
Layer 3 IGMP (Query used with Multicast Routing)
| Multicast Filtering
15