Volkswagen Passat 1995 Official Factory Repair Manual page 1228

EVAP canister system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
EVAP canister system
Note:
Hose connections are secured with screw-type
clamps, spring-type clamps or tensioning
clamps.
Always replace tensioning clamps with spring-
type clamps or screw-type clamps.
Fuel hoses at engine must only be secured with
spring-type clamps. The use of clamping collars
or screw clamps is not permitted.
Components marked with * are tested via On
Board Diagnostic (OBD)
Diagnostic mode 3: Check DTC memory.
VAS5024A spring clip installation tool is
recommended for installing spring-type clips.
Observe safety precautions
Observe rules for cleanliness
Removing and installing components of the
EVAP canister system
Fuel tank ventilation, checking
Page 1 of 10
Page ST-22 ,
Page 20-8 .
Page 20-10 .
Page 20-29 .
Page 20-31 .
6/12/2004
20-28