Ipmedpro (Ip Media Processor Circuit Pack) - Avaya Definity SI Maintenance Manual

IPMEDPRO (IP Media Processor Circuit Pack)

IPMEDPRO (IP Media Processor
Circuit Pack)
MO Name (in
Alarm Log)
IPMEDPRO
IPMEDPRO
IPMEDPRO
1 UU is the universal cabinet number (1 for PPN, 2-3 for EPNs). C is the carrier
designation (A, B, C, D, or E). SS is the number of the slot in which the circuit pack
resides (01 to 21).
The TN2302 (IPMEDPRO) circuit pack is the next generation H.323 platform. The
TN2302 includes a 10/100 BaseT Ethernet interface to support H.323 endpoints
for DEFINITY IP (Internet Protocol) trunks and H.323 endpoints. The TN2302 can
perform echo cancellation, silence suppression, DTMF detection, and
conferencing. It supports the following codecs, fax detection for them, and
conversion between them:
G.711 (mu-law or a-law, 64Kbps);
G.723.1 (6.3Kbps or 5.3Kbps audio);
G.729A (8Kbps audio);
The TN2302 IPMEDPRO circuit board is used by the DOLAN (Definity on the
LAN) feature to provide voice over IP connectivity. The TN2302 can run the Media
Processor (MedPro) application, which allows the TN2302 to act as a service
circuit to terminate generic RTP streams used to carry packetized audio over an
IP network. As part of the overall H.323 implementation, the TN2302 circuit pack
handles the audio streams while the TN799 C-LAN handles the TCP/IP signaling
channels. This maintenance object applies only to a TN2302 IPMEDPRO running
the Media Processor application.
The Media Processor application is built upon the existing ITS software, and as
such is not administered in DEFINITY as a DS1 trunk, and does not emulate a
DS1 for maintenance purposes. Use the following Maintenance procedures for
this application.
555-233-123
Alarm Initial Command to
1
Level Run
MAJOR test board UUCSS sh
MINOR test board UUCSS l
WARNING test board UUCSS sh
Full Name of MO
IP Media Processor Circuit Pack
IP Media Processor Circuit Pack
IP Media Processor Circuit Pack
Issue 4 May 2002 10-919